Easy Ways to Update Xiaomi Mi Drone 4K Firmware Manually | Xiaomi Indonesia 2021

Cara Mudah Update Manual Firmware Xiaomi Mi Drone 4K – Currently Xiaomi Mi Drone provides a firmware update for their Xiaomi Mi Drone, accessible on both iOS and Android by using the Mi Drone App. The Xiaomi Mi Drone update optimizes system performance and adds new functions to your Xiaomi Mi Drone.

The easiest way to update the firmware is through the Mi Drone App, along with the remote control and aircraft. Here are the Instructions for updating the firmware manually.

NOTE : There are some issues on the 1066. If the app shows a gray screen after the firmware update it’s expected to update the 1065.

Firmware Update

  • Added Camera Settings include contrast, sharpness, saturation, white balance.
  • Fixed no response when taking DNG photos.
  • Change the measurement mode to average.
  • Optimized video transmission when Camera is connected to Drone.
  • Fixed freezing issue when entering Media Library.

Previous update Update

  • Increase bit rate to 1080P/60 and 1080P/30
  • Optimize Camera TF card function
  • Optimized main stream effect mode 4K mode, optimized image quality 2.5K, 1080P30, 1080P60, optimized auto white balance
  • Low probability solved of camera problem

Mi Drone App update steps


1. Activate Mi Drone completely, and format your TF card with Mi Drone App.
2. Open the App, Go to Settings

3. Select Camera Settings

4. Select TF Card Format. (Note that the files in the TF card will be deleted after the format behavior)

5. Turn off Mi Drone, remove TF card from Camera.
6. Download the installed Camera Firmware package and unzip it;
7. Copy the firmware.bin file to the root directory of the TF card.

ATTENTION : For 1065 and 1066, need firmware.bin file and update.txt file to TF card root directory at the same time.

8. Insert the TF card into the Camera slot, and turn on the Mi Drone.
9. Check the camera’s red and white light status:

ATTENTION : Update time is about 2 minutes.

  • If the red light is always bright, and the white light is always bright or flashing slowly, it means that the camera has started normally.
  • After 3-5s from camera start, red light flash / white light at the same time means that camera has started burning firmware via TF card, please don’t turn off Mi Drone while burning firmware.
  • When the burning process is complete, the camera’s white light goes out. Wait until the red light is always bright, the white light is always bright or flashes slowly, which means the update is complete.
  • Check Camera version in App.

Download Firmware Xiaomi Mi Drone 4K

That’s the tutorial How to Easily Update Xiaomi Mi Drone 4K Firmware Manual, I hope this article is useful and useful for loyal readers of Xiaomi Indonesia. Thank you.