HOW TO CLEAN THE LCD WATER INPUT

HOW TO CLEAN THE LCD WATER INPUT

Water is one of the biggest enemies of electronic devices, one of which is cellphones. Currently, there are many cases of smartphones being exposed to water, ranging from being hit by rain, falling into the toilet, and so on. Although now some sophisticated smartphones already carry water-resistant or water-resistant features, some types of smartphones do not have this feature.

For the possibility of damage to the smartphone exposed to water is very large. Because basically electronic devices should not be exposed to water. If you have fallen into the water, then you have to take several steps, namely:

1. Remove SIM Card, Battery and SD Card

The first thing you have to do is remove the back case. Then remove the SIM card, battery, and SIM card. This is done to prevent a short circuit. Then place the component on a paper towel and rub gently.

2. Dry the LCD First

LCD is the part that is often affected by smartphones that are exposed to water. Drying the water on the LCD is very important, because if you don’t dry it immediately, the water will cause white spots on the LCD. These spots are created because the soft filaments contained in the LCD are exposed to water for too long. Therefore, if the cellphone is exposed to water, dry it immediately with a soft cloth or tissue.

3. Bury the cellphone into the rice

HOW TO CLEAN THE LCD WATER INPUT

This method is done because rice is absorbing water and can absorb all the water in your cellphone that is submerged in water. Bury the cellphone in rice for approximately 2-3 days so that the water in the cellphone completely disappears.

4. Use a Fan (If Not Using Rice)

If you don’t want to use rice to dry the water in your phone, then you can use a fan to dry it. However, this method is considered less efficient, because it will take a long time.

5. Don’t be too quick to turn on the cellphone

You have to patiently wait until the phone is completely dry. Don’t be too quick to turn your phone back on. Because if the water is still pooling in the cellphone and you turn it on, it will cause a short circuit on the smartphone. And it is certain that your cellphone will be completely damaged.

HOW TO CLEAN THE LCD WATER INPUT

That’s what you need to do if your phone gets wet. But your cellphone screen already has white patches, so what you need to do is:

1. Unload SIM Card, Battery and SD Card
2. After that, open the LCD, then if there are white spots, then you can clean it using eucalyptus oil and rub gently using a soft cloth or tissue paper.
3. Repeat the above method until completely clean.
4. Reinstall each component, and the phone is ready to be used again.

Thus our review on how to clean the LCD ingress of water. Hopefully useful and good luck.