How to Fix Hp Bootloop Stuck on Logo – Hallo!! Welcome to the short blog, on this occasion I will show you how to solve the Android bootloop phone stuck in the logo, which is usually experienced by android operators.
Before we go into the tutorial, let’s find out what the definition of . means Bootloop itself. So bootloop is a situation where the android system on your cellphone can’t boot or start up, which
Also Read: How To Install Google Camera Without Root
makes the phone fail to boot. So that it makes your android phone unusable how it should be.
But before we can conclude that Android is in a bootloop state, we must know its characteristics first so that unwanted problems do not occur, here are the characteristics of a bootloop cellphone.
Characteristics and Causes of Hp Bootloop:
The characteristics of our android phone are experiencing bootloop or android stuck at the logo :
- Android will restart itself continuously, until the battery runs out and if the battery is charged again. The cellphone will still turn on itself and restart continuously.
- The causes of this bootloop are also various, some are caused by incorrectly changing the font on Android with the help of an application that does not match the type of your Android phone.
So, to overcome this bootloop or total death, it can be fixed with 2 or more ways depending on the level of damage to the android phone that has been exposed to the bootloop, that is :
1. Overcome Android Bootloop Without Flash And Without PC
Now for how to fix this first bootloop cellphone, you can fix it by removing the battery on your cellphone and then reinstalling it, this method is intended for Android cellphones that experience a bootloop that is not too severe.
2. Overcoming Android Bootloop With Flash Firmware Via Odin
Did you install the wrong custom rom on your android phone? and make your android phone into a bootloop and you forget to back up the old rom? This method is a highly recommended method for you, especially for friends who have a Samsung bootloop cellphone.
You just need to download the firmware according to your Android phone, but you have to be careful when downloading it so you don’t get the wrong firmware, because it will make your Android phone fail during the process. flash via odin. After you finish downloading the firmware, then you open the Odin application on your PC or laptop, then you enter the firmware into the options PDA. And also make sure your android phone has been detected by odin, if you have selected Start and wait until the process is complete.
So many ways to overcome bootloop, hopefully it can be useful and thank you for visiting this blog.