How to Flash Hp Coolpad Roar Plus e570 Easily

Coolpad Roar Plus e570 Easily

If you need information on how to flash Hp Coolpad E570, then you’ve come to the right place. In this article, we will try to flash the Coolpad E570, following instructions on how to flash the Coolpad Roar Plus E570 smartphone. Regarding how to flash this time, we use the YGDP Tool which is slightly different from some of the previous tools, but can still be used and understood well in the tutorial guide. Well, just follow the steps below carefully step by step.

How to Use YGDP Tool to Flash Coolpad E570

First, you download and install the Android USB driver on your computer first. If the Android driver is already installed on your computer, you can skip this step.


Second, Next Download and install YGDP Tool on your computer.


Third, Open the YGDP flashing tool.

Fourth, Enter the password 369 or 9527 and click the login button.

Fifth, Next you will see the YGDP tool displayed, select it or click the configuration button at the top.

Sixth, Then you will enter a new dialog box as shown below to add a CPB file (firmware).

Seventh, Navigate to the previously downloaded unzipped firmware folder.
Then click apply.


Eighth
, Then connect the smartphone to your PC.

NinthIf you click the start button then the flashing process will run and take a few minutes.

Tenth, When the process is complete and successful it will be marked with a successful upgrade message.

Eleventh, Finished. Congratulations, you have successfully flashed the coolpad e570.

That’s how to Flash Coolpad Roar Plus, good luck, and hopefully this article is useful for all of you. thank you