Understanding Audio Jacks and Types

Listening to music is an exciting hobby for most people. In this era of increasingly sophisticated technology, we can listen to music in several ways. One of them by using a headset or earphones. At the end of the earphone, there is a connector that serves to connect the earphone speaker and microphone with our cellphone or smartphone.

These connectors are often referred to by the term “Audio Jack” So what is meant by Audio Jack is a connector that connects earphones or headphones with devices that can produce audio such as Audio Players, Smartphones or Mobile Phones, PC Computers, Laptops and electric musical instruments or devices that receive audio input from a microphone such as Amplifiers (speakers). ). Other names for Audio Jack include Phone Jack, Phone Connector, Headphone Jack, Earphone Jack or Jack Plug.

Read also:

Types of Audio Jack

When viewed from the size, there are Audio Jacks measuring 2.5mm (3/32 inches), 3.5mm (1/8 inches) and 6.35mm (ΒΌ inches). However, if you look at the number of conductors, these Audio Jacks can be divided into Audio Jacks TS, TRS and TRRS. What are TS, TRS and TRRS? Please read the brief discussion below.

A. Audio Jack type TS (Tip-Sleeve)

Audio Jack TS (Tip-Sleeve) is an Audio Jack which consists of only two conductors, namely the Tip conductor and the Sleeve Conductor. The tip is usually connected to the audio signal while the sleeve is connected to ground. Audio Jack TS is usually used for microphones or mono-style audio (right voice and left voice are the same).

B. Audio Jack type TRS (Tip-Ring-Sleeve)

Audio Jack TRS (Tip-Ring-Sleeve) It has three conductor sections namely Tip conductor, Ring conductor and Sleeve conductor. Generally, the Tip conductor section is connected to the left audio channel (Left Channel) and the Ring section is connected to the audio right channel (Right Channel) while the sleeve conductor is connected to Ground. Audio This TRS jack supports audio in Stereo mode.

C. Audio Jack type TRRS (Tip-Ring-Ring-Sleeve)

Audio Jack type TRRS (Tip-Ring-Ring-Sleeve) is the most complete type of Audio Jack because there are four conductor sections, namely 1 Tip conductor, 2 Ring conductors and 1 Sleeve conductor. Usually, this 3.5mm TRRS Audio Jack is used to listen to music and communicate on almost all types of Smartphones on the market today. This TRRS Audio Jack configuration is generally a Tip conductor for left channel audio (Left Channel), the first Ring conductor for right channel audio (Right Channel), second Ring conductor for Ground and Sleeve conductor for Microphone.

Thus a brief review of the Definition of Audio Jack and its Types. Hopefully the information that we convey this time can be useful for all readers. may be useful..